Products Description
This membrane is designed primarily for the separation of divalent and multivalent metal ions in aqueous solutions. The product model is YIME-NF-3090-8040, where YIME represents the brand; NF stands for nanofiltration; 3090 indicates extremely low rejection of monovalent ions and over 90% rejection of divalent ions; and 8040 refers to the membrane size. As an Industrial Nanofiltration Membrane 8040, it is engineered to deliver stable separation performance across a wide range of industrial and municipal applications.
Specifications:
|
Model
|
Effective Membrane
Area ft² (m²)
|
Daily Permeate Flow
(m³/d)
|
Stable Rejection
Rate(%)
|
Operating Pressure
(PSI)
|
|
YIME-NF-3090-8040 |
400(37.2) |
12 |
≥90.00 |
360 |
|
YIME-NF-3090-4040 |
80(7.4) |
3 |
≥90.00 |
360 |
Standard Testing Conditions:
|
Testing Conditions
|
Temperature(℃)
|
pH value
|
Recovery rate(%)
|
Maximum feedwaterSDI
|
|
MgSO4:2000mg/L |
25±5 |
6.5 |
15±5 |
5 |
Operating Conditions:
| Item | PACG100-8040 / PACT100-8040 | PACG100-4040 / PACT100-4040 |
|---|---|---|
| Max Feed Flow | 15 m³/h | 3.5 m³/h |
| Maximum Operating Solution Temperature | 30 °C | 30 °C |
| Maximum Operating Pressure | 500 psi | 500 psi |
| Maximum Operating Pressure Drop | 0.1 MPa | 0.1 MPa |
| Maximum Single Membrane Recovery Rate | 20% | 20% |
Ensuring that the feed water quality meets the required standards is essential, as nanofiltration membranes are highly sensitive to incoming water conditions. The turbidity and suspended solids should be kept as low as possible to minimize particle accumulation on the membrane surface, which can cause clogging and shorten membrane life. It is also critical to remove all residual chlorine and other oxidizing agents, since these substances can directly oxidize and irreversibly damage the membrane material. Organic matter (COD) in the feed water must be controlled to low levels as well, because excessive organics tend to accumulate on the membrane surface and lead to organic fouling, reduced permeate flow, and more frequent cleaning. Additionally, attention should be given to the hardness (Ca/Mg) and silica content of the water, as elevated concentrations can result in inorganic scaling or silica fouling on the membrane surface, impairing separation performance. For this reason, antiscalants or softening processes are commonly applied to prevent scaling and maintain stable operation.
Hot Tags: industrial nanofiltration membrane 8040, China industrial nanofiltration membrane 8040manufacturers, suppliers, factory







