What is the ratio of pure water to wastewater for an 800 Gpd Membrane?

May 27, 2025Leave a message

When purchasing a water purifier, we often hear a technical term - wastewater ratio.

 

So, what exactly does the wastewater ratio mean?

 

The wastewater ratio refers to the relationship between purified water (permeate) and concentrate water (wastewater). In the domestic water purifier market, the term "wastewater ratio" is also closely related to a key component known as a flow restrictor. Flow restrictors are generally divided into two types: fixed-flow restrictors and adjustable-flow restrictors, both of which are used to control the discharge rate of concentrate water in an RO system.

 

Flow restrictors are typically rated in cc, with the full unit being mL/min (milliliters per minute), indicating the volume of wastewater discharged per minute. For example, a 300 cc flow restrictor allows approximately 300 mL of concentrate water to be discharged every minute.

 

From a ratio perspective, the wastewater ratio represents the relationship between purified water production and concentrate water discharge. For example, many early RO water purifiers operated at a 1:3 wastewater ratio, meaning that for every one cup of purified water produced, three cups of concentrate water were discharged. With continuous advancements in membrane technology and system design, many modern high-efficiency water purifiers can now achieve higher recovery rates, significantly reducing wastewater generation.

 

However, a wastewater ratio is not necessarily better when it is higher or lower. If the wastewater ratio is too low, a large amount of water is wasted, although the membrane surface can be effectively flushed. On the other hand, if the wastewater ratio is too high, concentrated contaminants may accumulate on the membrane surface, accelerating membrane scaling and fouling, shortening membrane service life, and potentially reducing permeate water quality. Therefore, selecting an appropriate wastewater ratio is essential for maintaining stable system performance.

 

In reality, the optimal wastewater ratio is not a fixed value but the result of multiple influencing factors. For example, the higher the feed water TDS (Total Dissolved Solids), the more concentrate water is generally required to reduce the concentration of contaminants on the membrane surface. The RO membrane's rejection rate and water production efficiency also play important roles in determining the appropriate recovery rate.

 

At the same time, operating conditions such as the desired permeate TDS, concentrate water salinity, feed water temperature, and operating pressure can directly affect membrane performance. In addition, factors such as salt crystallization and scaling rates, membrane element design, expected membrane service life, and operating costs must all be taken into consideration when determining the wastewater ratio. As a result, the wastewater ratio often needs to be optimized according to specific water quality conditions and system configurations in order to achieve the best balance between water quality, membrane lifespan, and water-saving performance.

 

Therefore, the optimal wastewater ratio can vary depending on geographic location, feed water quality, and RO system specifications. A properly designed wastewater ratio not only improves system recovery and reduces water waste, but also helps extend membrane service life and ensures stable long-term purification performance.